The main objective of this Standard Operation procedure is to develop a safe and systematic practice for collecting and analyzing samples of toxic wastewater from industries in order to determine the level of toxicity. The parameters for toxicity are in accordance with the international environmental law and policies as stipulated by the Center for International Environmental Law (CIEL). The procedures serve to ascertain whether the levels of toxicity are within the allowable limits of the CIEL and the wastewater pretreatments agreements of the company.The practices highlighted in this SOP are pertinent to environmental inspectors who evaluate the compliance regulations of wastewater treatment by various manufacturing industries, water treatment, and sewerage services companies (Philippe, 2006). In addition, this SOP practices are helpful to environmental compliance managers of factories that release wastewater to the nearby water bodies.The international environmental law requires that factories should comply with the policy of environmental conservation. The fundamental approach to ensuring this is through ensuring that toxic levels of wastewater released by the factories are kept at the minimum levels possible. Detailed Chemistry is done in order to assess the toxicity of the effluent water from the Wastewater Treatment plant of the factory. In order to facilitate the analysis of levels of toxicity of the wastewater, samples of the pretreated water released by the company are required. Water samples can be collected instantaneously or compositely. The devices used to collect the samples can be either automatic samplers or Sample Dip Poles. Automatic samplers collect the wastewater samples periodically after a predetermined duration of time. After sampling, the effluent sample is preserved in more sample containers for future references when need arises. The sample is transported to CIEL laboratories under iced conditions in order to determine the toxicity levels (Spellman, 2010). The test results are compared with the allowable levels as stipulated by CIEL in the international environmental law and policy (Kaul, 2002).Wastewater from factories is broadly categorized into sanitary wastewater and process wastewater. In some cases, it can be a combination of both sanitary and process wastewater. Irrespective of the type of the wastewater, the sampler should treat all wastewater as if they contain a toxic compound until the time when the test results reveal otherwise. This toxic compound can cause human illness; therefore, the water samples should be handled with a lot of care (Spellman, 2010). The personnel in charge of collecting the wastewater samples should put on protective gloves, and the containers that hold the wastewater samples requires handling with adequate care (Spellman, 2010). The sampler should also put on other protective accessories such as waterproof safety boots that are steel-toed, protective headgear, eyeglasses, and earplugs in order to shield the sampler from environmental hazards. The working environment may change, and the sampler has to make sure that he ascertains the state of the working conditions before working. For example, slippery surfaces and edged working surfaces require testing prior to working.The samplers working environment is filled with various toxic chemicals, which may be present in the wastewater sample and those chemicals used in the preservation of the wastewater samples. For instance, Concentrated Sulfuric acid, Sodium Peroxide, and Strong Nitric acidare used in the preservation of the wastewater sample and cyanide samples. The three compounds are toxic and corrosive, implying that samplers have to handle them with great care. In addition, they should avoid skin contact with the above preservatives (Spellman, 2010).In order to avoid contaminating the waste sample, the samplers should make sure that introduction of unnecessary contaminants to the wastewater samples are avoided at all costs. This is because the primary objective of wastewater sampling is to bring out the true state of the wastewater from the factories without compromise (Spellman, 2010).The development of this SOP is meant to outline systematic procedures for Wastewater inspectors. All other personnel such as environmental compliance managers of factories, who may undertake the practices highlighted in this SOP must have the fundamental Wastewater Management Training and Wastewater Inspector Accreditation from NSF international. Another key skills requirement is basic expertise in conducting onsite inspections on wastewater treatment plants. In addition, the Certificate of Accreditation from NSF must be valid with a maximum duration of five years since the date of issuance. Technical expertise concerning health and environmental sciences is a significant requirement for personnel who will use this SOP to sample wastewater from factories (Philippe, 2006).Additional training requirements for this SOP include six hours refresher training on sampling techniques, and on-the-job training concerning environmental ethics and ethical code of conduct associated with reporting cases involving violation of environmental laws.